Check this out on our new website!
After rigorous engineering and development, cp-e is proud to release this Race Core Front Mount Intercooler (FMIC) for your 2015+ EcoBoost Mustang. The cp-e team took what worked with its initial intercooler offerings and pushed the envelope even further for the most powerful high horsepower EcoBoost builds. With several of their sponsored EcoBoost Mustangs out-running V8s, they knew they needed to step up their cooling game for those big power builds!
MADE IN THE USA: cp-e proudly designs and manufactures their Delta Core Front Mount Intercooler right here in the USA. Constructed from aluminum for its ability to quickly dissipate heat, this Intercooler features a bar and plate design with cast end tanks. The end tanks are designed with Turbulence Reduction Fins to evenly distribute airflow throughout the entire core to optimize cooling efficiency while eliminating internal turbulence.
Features and Benefits of the cp-e Race V2 Delta Core Front Mount Intercooler (FDCK00005T):
- 21"x17"x3.75" Core Size
- Low Turbulence End Tank Design
- Minimal Pressure Drop
- Maximized Core Design
- Substantially Lower and More Consistent Charge Temps
- Bolt-on Design, No Modification Needed
- Fully Cast End-Tanks
cp-e started off by determining the maximum size core that could fit without irreversible modification to your Mustang. The EcoBoost FMIC uses the bar and plate design to help ensure a high level of efficiency.
cp-e then began designing the perfect EcoBoost FMIC endtanks, developing a design that not only encloses the monstrous core, but also requires no cutting, no drilling and no permanent modification to your S550. With the laser cut brackets, the intercooler mounts in the stock location while matching up to the stock intercooler piping. However, if you are looking to make big power, you can now upgrade the piping when your power demands need it and easily modify this intercooler to accept the larger intercooler piping by utilizing the unique endtank design.
As always, the cp-e intercooler includes cast endtanks which are welded and pressure tested with the core. What sets these endtanks apart from the rest is the engineering behind the shape and internal design. Hours of design and computer flow diagrams have been put into the tanks' design to virtually eliminate turbulence within them. Many times, upgrading an intercooler causes increased turbo-lag, and an overall pressure loss. This is because of the large size of the core and the turbulence within the endtanks. By designing the endtanks to be smaller and more efficient, cp-e has found a way to minimize turbulence in order to keep the drivability of the Mustang high, while still enlarging the intercooler drastically.
The internal design of the endtanks directs the air to bring the most optimal airflow as well as an even distribution throughout the core. In intercoolers, the back half of the core only does 25% of the cooling. The endtanks have been designed to direct the air properly into the core for the most even cooling, giving your S550 Mustang the most consistent conditions going into the engine.
Please Note: Due to the massive size, this core requires the active grille shutters to be removed. This is completely reversible and does not require permanent modification to your Mustang.
For the latest performance and enhancement equipment for your 2015+ EcoBoost Mustang, cp-e upgraded equipment is available. Developing everything for the EcoBoost Mustang from cold air intakes, downpipes, turbo kits& piping, cp-e supplies our customers with the latest upgrades.
Order cp-e's FDCK00005T Race V2 Delta Core Front Mount Intercooler for your 2015, 2016, 2017, 2018 or 2019 EcoBoost Mustang today.